Epoxy Resin and Hardener

• Description
• Specifications
• Amazon

• Aerospace-Grade Room-Temperature Cure Laminating Epoxy Resin & Hardener Refill

  Formulated for high-strength structural composite fabrication and carbon bicycle frame repair, our pre-measured 2-part Epoxy Resin and Hardener system delivers superior wet-out of carbon fiber, Kevlar, and fiberglass reinforcements with an ample 45-minute working pot life at 72°F (22°C) and a tough room-temperature cure—no curing oven required.

  Packaged in leak-free dispensing bottles (2 fl oz Part A Resin + 1 fl oz Part B Hardener) in our Lebanon, Tennessee facility. Ideal as a replenishment matrix for the Predator DIY Carbon Repair Kit or custom composite layups.

• Kit Contents:	(1) 2 fl oz Bottle Part A Laminating Epoxy Resin + (1) 1 fl oz Bottle Part B Hardener
  Mix Ratio:	Pre-measured 2:1 by volume (combine full contents or measure 2 parts Resin to 1 part Hardener)
  Pot Life / Working Time:	~45 minutes at 72°F (22°C)
  Cure Schedule:	24-Hour Room-Temperature Cure at 70°F–75°F (21°C–24°C)
  Shipping Compliance:	Ships via Ground surface transport (UPS Ground / USPS Ground Advantage) in compliance with DOT 49 CFR § 173.150 Limited Quantity regulations

• This Product is available on Amazon
  
  Select products are Fulfilled By Amazon and have Prime Availability while other Products are available on Amazon but are fulfilled by Predator Cycling. Shipping rates vary.

*This listing is for replacement or additional epoxy resin and hardener used in conjunction with the Predator DIY Carbon Repair Kit.